!: Best Buy Beckett 7060210 325 gph Submersible Pump grand sale

Brand : Beckett | Rate : | Price : $39.95
Post Date : Mar 29, 2011 02:32:30 | Usually ships in 1-2 business days

Beckett 7060210 325 gph Submersible Pump

• Water pump for ponds up to 700 gallons, garden waterfalls, fountains
• Circulates 325 gallons per hour; oil free design is environmentally friendly
• Designed for underwater use with low maintenance, continuous operation
• UL and CSA approved for optimal safety
• Includes 16-foot power cord; 2-year manufacturer warranty

More Specification..!!

Beckett 7060210 325 gph Submersible Pump

!: C2 Rowing Machine Buy !: Frye Melissa Button Boot Black Best

!: Prices 2 each: Small Pond Pump (7060110) save

Brand : Beckett | Rate : | Price :
Post Date : Mar 19, 2011 16:32:47 | Usually ships in 1-2 business days

2 each: Small Pond Pump (7060110)

• G210AG20
• 210 gallons/hour at 1' lift
• 7.1 ft. pumping height (max)
• Underwater use only

More Specification..!!

2 each: Small Pond Pump (7060110)

!: Frye Shoes Grand Sale !: Low Cost Frye Carson Boots !: Lowest Price Toro Electric Blower Vac

6.5 chevy boat diesel conversion Part 1

!: 6.5 chevy boat diesel conversion Part 1

I adapted a GM 6.5 liter turbo diesel to a Mercruiser Bravo One outdrive to install in my old boat in place of the weak Perkins inboard engine. There are still many things to be done but I made the brackets for the raw sea water water pump and a second power steering pump. The engine will have its own heat exchanger. A second heat exchanger has several compartments for oil cooler, power steering cooler, and a section for the second power steering pump. I will add a liquid to air intercooler between the turbo and the intake. The second power steering pump will pump cold syntheyic ATF thru the intercooler. So no seawater touches any of the engine components. The exhaust will be wrapped in fiberglass cloth and refractory cement covered in aluminum tape. I'll make it work. The diesel will fit the later model Mercruiser bellhousing with the large hole as long as the housing is spaced 1/2" from the engine to make room for the drive hub bolts. Even 2 store bought 3/8" steel bellhousing spacers will work and will leave plenty of spline engaged in the drive plate. I will install the engine and outdrive and test it in the stock 200HP configuration. Then comes the intercooler and the bump-up to the injection pump fuel limiter.

6.5 chevy boat diesel conversion Part 1

!: Saved Roof Rake Snow